首頁>外文期刊>一般工業技術>工程技術科學>Bulletin of the Chinese Academy of Sciences

Bulletin of the Chinese Academy of Sciences

Bulletin of the Chinese Academy of Sciences

中文名稱：中國科學院院刊

ISSN：1003-3572
出版周期：0.351

發文量：1218

期刊論文

年度選擇

2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9a10期
2017
- 第1期
- 第10期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
2016
- 第1期
- 第10期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
- 第9期
2015
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
- 第7期
- 第8期
2014
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2013
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2012
- 第1期
- 第2期
- 第3期
- 第4a5期
- 第6期
2011
- 第1a2期
- 第3期
- 第4a5期
- 第6期
2010
2009
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2008
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2007
- 第1期
- 第2期
- 第3期
- 第4期
- 第5a6期
2006
- 第3期
- 第1a2期
- 第3期
- 第4期
- 第5a6期
2005
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2004
- 第1期
- 第2期
- 第3期
- 第4期
- 第5a6期
2003
- 第1期
- 第2期
- 第3a4期
- 第5a6期
2002
- 第3期
- 第4期
- 第5期
- 第6期
2001
- 第1期
- 第2期
2000
- 第1期
- 第2期
- 第5期
- 第6期

更多>>

全選（0）

1.Hot Corrosion Behavior of Stainless Steel with Al-Si/Al-Si-Cr Coating

機譯：Al-Si / Al-Si-Cr涂層不銹鋼的熱腐蝕行為
- 作者：Guangyan Fu;Yongzhao Wu;Qun Liu;Rongguang Li;Yong Su
- 期刊名稱：《High temperature materials and processes》 | 2017年第3期
- stainless steel;
- Al-Si coating;
- Al-Si-Cr coating;
- hot corrosion;
2.A Comparative Study of Hot Deformation Behaviors for Sand Casting and Centrifugal Casting Q235B Flange Blanks

機譯：砂型鑄造和離心鑄造Q235B法蘭毛坯熱變形行為的比較研究
- 作者：Fangcheng Qin;Yongtang Li;Li Ju
- 期刊名稱：《High temperature materials and processes》 | 2017年第3期
- Q235B flange blank;
- centrifugal casting;
- hot compression;
- texture;
- constitutive model;
3.Analysis of Power Supply Heating Effect during High Temperature Experiments Based on the Electromagnetic Steel Teeming Technology

機譯：基于電磁鋼定心技術的高溫實驗電源加熱效果分析
- 作者：Ming He;Qiang Wang;Xinan Liu;Chunyang Shi;Tie Liu;Jicheng He
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- clean steel;
- electromagnetic induction;
- industrial application;
- heating effect;
- power loss;
4.Effect of Composition, High Magnetic Field and Solidification Parameters on Eutectic Morphology in Cu-Ag Alloys

機譯：成分，強磁場和凝固參數對Cu-Ag合金共晶形態的影響
- 作者：Congcong Zhao;Engang Wang;Xiaowei Zuo
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- Cu-Ag alloy;
- eutectic;
- lamellar spacing;
- solidification;
- high magnetic field;
5.Processing and Microstructure Characteristics of As-Cast A356 Alloys Manufactured via Ultrasonic Cavitation during Solidification

機譯：凝固過程中超聲空化法制備的鑄態A356合金的加工與組織特征
- 作者：Yang Xuan;Shian Jia;Laurentiu Nastac
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- ultrasonic cavitation;
- A356 alloy;
- nanocomposites;
- microstructure;
- nanoparticle dispersion;
6.Preface to the Special Issue on 'Cutting Edge of Computer Simulation of Solidification, Casting and Refining'

機譯：《凝固，鑄造和精煉的計算機模擬前沿》特刊序言
- 作者：Keiji Nakajima;Qiang Wang
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
7.Application of Mathematical Models for Different Electroslag Remelting Processes

機譯：數學模型在不同電渣重熔工藝中的應用
- 作者：Zhou Hua Jiang;Jia Yu;Fu Bin Liu;Xu Chen;Xin Geng
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- electroslag remelting;
- mathematical models;
- transport processes;
- solidification structure;
8.Deformation and Structure Difference of Steel Droplets during Initial Solidification

機譯：初始凝固過程中鋼滴的變形和結構差異
- 作者：Yang Li;Jing Wang;Jiaquan Zhang;Changgui Cheng;Zhi Zeng
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- initial solidification;
- droplet experiments;
- solidification modes;
- hypo-peritectic steel;
- deformation degree;
- structure;
9.Research on Soft Reduction Amount Distribution to Eliminate Typical Inter-dendritic Crack in Continuous Casting Slab of X70 Pipeline Steel by Numerical Model

機譯：X70管線鋼連鑄板坯軟還原量分布消除典型枝晶裂紋的數值模型研究。
- 作者：Ke Liu;Chang Wang;Guo-liang Liu;Ning Ding;Qi-song Sun;Zhi-hong Tian
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- continuous casting slab;
- inter-dendritic crack;
- X70 pipeline steel;
- soft reduction amount distribution;
- numerical model;
10.Recent Aspects on the Effect of Inclusion Characteristics on the Intragranular Ferrite Formation in Low Alloy Steels: A Review

機譯：夾雜物特征對低合金鋼中晶內鐵素體形成影響的最新研究進展
- 作者：Wangzhong Mu;Paer Goeran Joensson;Keiji Nakajima
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- inclusion;
- intragranular ferrite (IGF);
- nucleation;
- growth;
- steel;
- oxide metallurgy;
11.Effect of Construction Manner of Mould Cluster on Stray Grain Formation in Dummy Blade of DD6 Superalloy

機譯：結晶器團簇的構建方式對DD6高溫合金假葉片雜晶形成的影響
- 作者：Runnan Wang;Xuewei Yan;Zhonglin Li;Qingyan Xu;Baicheng Liu
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- single crystal;
- stray grains;
- numerical simulation;
- combination effects;
- process window;
12.Dendrite Growth Characteristics and Segregation Control of Bearing Steel Billet with Rotational Electromagnetic Stirring

機譯：旋轉電磁攪拌軸承鋼坯的枝晶生長特性及偏析控制
- 作者：Yu Xu;Xiu-Jie Xu;Zhuang Li;Tao Wang;An-Yuan Deng;En-Gang Wang
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- dendrite growth;
- bearing steel;
- rotational electromagnetic stirring;
- segregation;
13.Numerical Simulation and Experimental Casting of Nickel-Based Single-Crystal Superalloys by HRS and LMC Directional Solidification Processes

機譯：HRS和LMC定向凝固過程的鎳基單晶高溫合金的數值模擬和實驗鑄造
- 作者：Xuewei Yan;Run nan Wang;Qingyan Xu;Baicheng Liu
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- nickel-based superalloy;
- directional solidification;
- liquid metal cooling;
- numerical simulation;
- microstructure;
14.Mathematical Modeling on Deformation Behavior of Solidified Shell in Continuous Slab Casting with Soft Reduction

機譯：薄板坯連鑄連鑄凝固殼變形行為的數學模型
- 作者：Changgui Cheng;Feng Zhang;Yang Li;Ying Chen;Yan Jin
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- mathematical model;
- slab;
- soft reduction;
- solidification shell;
- deformation behavior;
15.Numerical Modeling of Fluid Flow, Heat Transfer and Arc-Melt Interaction in Tungsten Inert Gas Welding

機譯：鎢極惰性氣體保護焊流體流動，傳熱和電弧熔體相互作用的數值模擬
- 作者：Linmin Li;Baokuan Li;Lichao Liu;Yuichi Motoyama
- 期刊名稱：《High temperature materials and processes》 | 2017年第4期
- TIG welding;
- numerical simulation;
- arc-melt interaction;
- magnetohydrodynamics;
- dynamic mesh;
16.Effect of Z Values on the Microstructure and Mechanical Properties of Post-sintered Reaction Bonded β-SiAlON

機譯：Z值對β-SiAlON燒結后反應鍵組織和力學性能的影響
- 作者：Yanjun Li;Donghua Liu;Han Jin;Donghai Ding;Guoqing Xiao;Zhongqi Shi;Zhihao Jin
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- SiAlON;
- reaction bonding;
- post-sintering;
- mechanical properties;
17.Decarburization and Inclusion Removal Process in Single Snorkel Vacuum Degasser

機譯：單通氣管真空脫氣機脫碳除雜物工藝
- 作者：Geng Dian-Qiao;Hong Lei;Ji-Cheng He
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- decarburization;
- inclusion;
- bubble;
- SSF;
- RH;
18.Hot Deformation Behavior and Constitutive Modeling of Alloy 800H Considering Effects of Strain

機譯：考慮應變影響的800H合金熱變形行為與本構模型
- 作者：Rui Luo;Qi Zheng;Zhending Tang;Yongquan Yao;Guifang Xu;Dongsheng Li;Xiaonong Cheng
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- alloy 800H;
- dynamic recrystallization;
- microstructure;
- hot deformation constitutive model;
- compensation of strain;
19.The Kirkendall Effect and Multi-component Diffusion Simulations

機譯：柯肯德爾效應和多組分擴散模擬
- 作者：Bartek Wierzba
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- bivelocity method;
- interdiffusion;
- drift velocity;
- local entropy production;
20.Effects of Ti-Mg Complex Inclusions on Acicular Ferrite Nucleation

機譯：Ti-Mg復合夾雜物對針狀鐵素體形核的影響
- 作者：Kong Hui;Lin Hao;Yue Qiang;Cai Zhengyu
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- oxide metallurgy;
- intragranular acicular ferrite;
- grain refinement;
21.Discussion on Modeling Capability for Macrosegregation

機譯：宏觀分離建模能力的探討
- 作者：Menghuai Wu;Abdellah Kharicha;Andreas Ludwig
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- macrosegregation;
- solidification;
- crystal growth;
- heat and mass transfer;
- porosity;
- diffusion kinetics;
22.Material Flow Behavior of Refill Friction Stir Spot Welded LY12 Aluminum Alloy

機譯：填充摩擦攪拌點焊LY12鋁合金的材料流動行為
- 作者：Shude Ji;Zhengwei Li;Yue Wang;Lin Ma;Liguo Zhang
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- refill friction stir spot welding;
- LY12 aluminum alloy;
- material flow;
- microstructure;
23.The Model Analysis of Inclusion Moving in the Swirl Flow Zone Sourcing from the Inner-Swirl-Type Turbulence Controller in Tundish

機譯：中間包內旋流湍流控制器在旋流區中夾雜物運動的模型分析
- 作者：Yan Jin;Chen Ye;Xiao Luo;Hui Yuan;Changgui Cheng
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- swirling flow;
- tundish;
- quality steel;
- inclusion;
- force analysis;
24.Study on High-Temperature Mechanical Properties of Low-Carbon Fe-Mn-Si-Al TWIP Steel

機譯：低碳Fe-Mn-Si-Al TWIP鋼的高溫力學性能研究
- 作者：Shiqi Li;Jianhua Liu;Hongbo Liu;Changling Zhuang;Jian Liu;Zhibiao Han
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
25.Mechanical Properties and Microstructures of Ni20Cr Micro-wires with Abnormal Plastic Deformation

機譯：塑性變形異常的Ni20Cr微絲的力學性能和組織
- 作者：Xiuwen Zhou;Xudong Liu;Yidong Qi;Weidong Wu
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- NiCr micro-wire;
- cold-drawn;
- microstructure;
- strength property;
26.Microstructure and Properties of W-Cu Composite/Fe-Based Powder Alloy Vacuum Brazed Joint with Different Filler Metals

機譯：不同填充金屬的W-Cu復合/ Fe基粉末合金真空釬焊接頭的組織和性能
- 作者：C. Z. Xia;J. Yang;X. P. Xu;J. S. Zou
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- W-Cu composite;
- microstructure;
- element diffusion;
- bending strength;
- fracture feature;
27.Mathematical Modeling of Liquid Slag Layer Fluctuation and Slag Droplets Entrainment in a Continuous Casting Mold Based on VOF-LES Method

機譯：基于VOF-LES法的連鑄結晶器內液渣層起伏和夾帶液滴數學模型
- 作者：Peng Zhao;Qiang Li;Shi Bo Kuang;Zongshu Zou
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- continuous casting mold;
- slag entrainment;
- mathematical modeling;
- Large Eddy Simulation;
- Volume of Fluid;
28.The Effects of Molding Materials on Microstructure and Wear Behavior of A356 Alloy

機譯：成型材料對A356合金的組織和磨損行為的影響
- 作者：Musa Yildirim;Dursun OEzyuerek;Tansel Tuncay
- 期刊名稱：《High temperature materials and processes》 | 2017年第5期
- A356;
- cooling rate;
- wear behavior;
29.Discussion of Carbon Emissions for Charging Hot Metal in EAF Steelmaking Process

機譯：電弧爐煉鋼過程中鐵水裝料碳排放的探討
- 作者：Ling-zhi Yang;Tao Jiang;Guang-hui Li;Yu-feng Guo
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- electric arc furnace;
- hot metal charging ratio,power;
- waste heat utilization;
- carbon emissions;
30.Predictive Models for Modulus of Rupture and Modulus of Elasticity of Particleboard Manufactured in Different Pressing Conditions

機譯：不同壓制條件下刨花板斷裂模量和彈性模量的預測模型
- 作者：Sebahattin Tiryaki;Ugur Aras;Huelya Kalaycioglu;Emir Erisir;Aytac Aydin
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- model comparison;
- modulus of elasticity,modulus of rupture;
- particleboard;
- prediction;
- wood;
31.The Enhancing Effect of Microwave Irradiation and Ultrasonic Wave on the Recovery of Zinc Sulfide Ores

機譯：微波輻射和超聲波對硫化鋅礦石回收的增強作用
- 作者：Kun Yang;Libo Zhang;Chao Lv;Shiwei Li;Jinhui Peng;Aiyuan Ma;Weiheng Chen;Feng Xie
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- zinc sulfide ores;
- microwave roasting;
- syner-gistic chelation;
- recovery of zinc;
32.Morphological Evolution of Low-Grade Silica Fume at Elevated Temperature

機譯：低溫下低級硅粉的形態演變
- 作者：Junhong Chen;Tong Li;Xiaoping Li;Kuo-Chih Chou;Xinmei Hou
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- low-grade silica fume;
- morphological development;
- thermal treatment;
33.Estimation of Various Properties of CaO-'FeO'-SiO_2 System at 1,673 K by Mass Triangle Model

機譯：三角法估算CaO-“ FeO” -SiO_2體系在1,673 K下的各種性質
- 作者：Yaxian Wang;Lijun Wang;Kuo-chih Chou
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- optimization;
- geometrical model;
- molten slag;
34.The Self-assembled Deposition on the Surface of Mono-crystalline Silicon Induced by High-Current Pulsed Electron Beam

機譯：大電流脈沖電子束在單晶硅表面的自組裝沉積
- 作者：Zhang Conglin;Guan Qingfeng;Chen Jie;Yan Pengcheng;Lv Peng
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- HCPEB;
- silicon;
- self-deposited structure,dislocation;
35.Photoluminescence Properties of Eu~(3+)-activated Silicate Phosphors

機譯：Eu?（3+）活化硅酸鹽熒光粉的光致發光性質
- 作者：Esra OEztuerk
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- silicate structure;
- high temperature solid state reaction method;
- photoluminescence;
- rare earth ions;
36.Synthesis, Acidity and Catalytic of the Rare Earth Ce Loaded on the Composite Pore Zeolite Catalyst for Hydrogenation Cracking

機譯：負載在復合孔沸石加氫裂化催化劑上的稀土鈰的合成，酸性和催化作用
- 作者：Chunwei Shi;Wenyuan Wu;Xue Bian;Mingyuan Pei;Shanlin Zhao;Ping Chen
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- micro-mesoporous composite materials;
- modified molecular sieve;
- Ce;
- synthesis;
- characterization,catalysis;
37.Numerical Model of Dephosphorization Reaction Kinetics in Top Blown Converter Coupled with Flow Field

機譯：流場耦合頂吹轉爐脫磷反應動力學數值模型。
- 作者：Wei Liu;Shufeng Yang;Jingshe Li;Minghui Wang
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- steelmaking;
- top blown converter;
- dephosphorization kinetics;
- CFD;
- numerical simulation;
38.Estimation for Iron Redox Equilibria in Multicomponent Slags

機譯：多組分渣中鐵氧化還原平衡的估算
- 作者：Jun-Hao Liu;Guo-Hua Zhang;Kuo-Chih Chou
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- X_(FeO_2~-) / X_(Fe~(2+) ratio;
- multicomponent slags;
- model;
39.The Effect of Multi-inclined Holes on the Creep Properties of Nickel-Based Superalloy

機譯：多斜孔對鎳基高溫合金蠕變性能的影響
- 作者：Dongfan Li;Zhixun Wen;Shaofei Wang;Chenyu Liu;Zhufeng Yue
- 期刊名稱：《High temperature materials and processes》 | 2017年第6期
- multi-inclined holes;
- GH3536;
- dimples and voids;
- inflection point;
40.Influence of Ni Additions on the Viscosity of Liquid Al_2Cu

機譯：鎳添加量對液態Al_2Cu粘度的影響
- 作者：Mudry Stepan I.;Vus Volodymyr M.;Yakymovych Andriy S.
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- activation energy;
- molten Al-Cu-Ni alloys;
- viscosity;
41.Effect of Temperature Field on Formation of Friction Stir Welding Joints of Ti-6Al-4V Titanium Alloy

機譯：溫度場對Ti-6Al-4V鈦合金攪拌摩擦焊接頭形成的影響
- 作者：Yue Yumei;Wen Quan;Ji Shude;Ma Lin;Lv Zan
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- friction stir welding;
- temperature gradient;
- tensile residual stress;
- Ti-6Al-4V titanium alloy;
- tunnel defect;
42.Influence of Ti on the Hot Ductility of High-manganese Austenitic Steels

機譯：Ti對高錳奧氏體鋼熱延展性的影響
- 作者：Liu Hongbo;Liu Jianhua;Wu Bowei;Su Xiaofeng;Li Shiqi;Ding Hao
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- grain boundary sliding;
- high-Mn austenitic steels;
- hot ductility;
- Ti-microalloying elements;
43.A Study at the Workability of Ultra-High Strength Steel Sheet by Processing Maps on the Basis of DMM

機譯：基于DMM的加工圖研究超高強度鋼板的可加工性
- 作者：Xia Yufeng;Long Shuai;Wang Tianyu;Zhao Jia
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- hot tensile test;
- processing map;
- processing parameter;
- ultrahigh strength steel;
44.Influence of Secondary Cooling Mode on Solidification Structure and Macro-segregation Behavior for High-carbon Continuous Casting Bloom

機譯：二次冷卻方式對高碳連鑄坯凝固組織和宏觀偏析行為的影響
- 作者：Dou Kun;Yang Zhenguo;Liu Qing;Huang Yunhua;H. Hongbiao Dong H.
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
45.Characterization of High Temperature Deformation Behavior of BFe10-1-2 Cupronickel Alloy Using Orthogonal Analysis

機譯：正交分析表征BFe10-1-2鎳銅合金的高溫變形行為
- 作者：Cai Jun;Wang Kuaishe;Zhang Xiaolu;Wang Wen
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
46.Effects of Mn and Al on the Intragranular Acicular Ferrite Formation in Rare Earth Treated C-Mn Steel

機譯：錳和鋁對稀土處理的碳錳鋼中晶狀針狀鐵素體形成的影響
- 作者：Song Mingming;Song Bo;Yang Zhanbing;Zhang Shenghua;Hu Chunlin
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- heterogeneous nucleation;
- inclusion;
- intragranular acicular ferrite;
- microstructure;
- rare earth;
47.Oxidation Behavior of TiAl-Based Alloy Modified by Double-Glow Plasma Surface Alloying with Cr-Mo

機譯：Cr-Mo雙輝等離子表面合金改性的TiAl基合金的氧化行為
- 作者：Wei Xiangfei;Zhang Pingze;Wang Qiong;Wei Dongbo;Chen Xiaohu
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- Cr-Mo;
- double-glow plasma surface;
- oxidation;
- TiAl;
48.Effect of Plate Thickness on Tensile Property of Ti-6Al-4V Alloy Joint Friction Stir Welded Below β-Transus Temperature

機譯：β-轉變溫度以下平板厚度對Ti-6Al-4V合金接頭摩擦攪拌拉伸性能的影響
- 作者：Ji Shude;Wang Yue;Li Zhengwei;Ma Lin;Zhang Liguo;Yue Yumei
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- below β-transus temperature;
- elongation;
- friction stir welding;
- thickness;
- Ti-6Al-4V alloy;
49.Corrosion Process of Stainless Steel 441 with Heated Steam at 1,000 °C

機譯：1000℃下加熱蒸汽對不銹鋼441的腐蝕過程
- 作者：Chen Zhiyuan;Wang Lijun;Yu Ziyou;Li Fushen;Sun Zaihong;Zhao Hailei;Chou Kuochih
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- Fe-Cr alloys;
- high temperature oxidation;
- interconnect;
- Raman spectrum;
- solid oxide fuel cell;
- steam;
50.Transient Liquid Phase Bonding of Nickel-Base Single Crystal Alloy with a Novel Ni-Cr-Co-Mo-W-Ta-Re-B Amorphous Interlayer

機譯：新型Ni-Cr-Co-Mo-W-Ta-Re-B非晶中間層的鎳基單晶合金的瞬態液相鍵合
- 作者：Guo Wei;Wang Haiyan;Jia Qiang;Peng Peng;Zhu Ying
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- interlayer alloy;
- microstructure;
- post-weld heat treatment;
- TLP bonding;
- wettability;
51.Experimental Study on Application of Boron Mud Secondary Resource to Oxidized Pellets Production

機譯：硼泥二次資源在氧化球團生產中應用的實驗研究
- 作者：Fu Xiaojiao;Chu Mansheng;Zhao Jiaqi;Chen Shuangyin;Liu Zhenggen;Wang Siyuan
- 期刊名稱：《High temperature materials and processes》 | 2017年第7期
- additive;
- boron mud;
- oxidized pellets;
- pellets properties;
- secondary resource;
52.Effect of B_2O_3 on Volume Stability and Strength of Corundum-based Castables

機譯：B_2O_3對剛玉基澆鑄料體積穩定性和強度的影響
- 作者：Zhang Chuanyin;Ye Guotian;Shang Xuejun;Zhai Pengtao;Chen Liugang
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- boron oxide;
- corundum castables;
- hot modulus of rupture;
- permanent linear change;
53.Influence of Heat Treatment on the Mechanical Properties of Ni Films on 430 Stainless Steel Substrate

機譯：熱處理對430不銹鋼基底Ni膜力學性能的影響
- 作者：Pan Yong;Cui Junwei;Lei Weixin;Zhou Jie;Ma Zengsheng
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- heat treatment;
- nanoindentation;
- Ni films;
- stress-strain relationship;
54.Thermodynamic Analysis of the Selective Reduction of a Nickeliferous Limonitic Laterite Ore by Hydrogen

機譯：氫選擇性還原鎳鐵褐鐵紅土礦石的熱力學分析
- 作者：Elliott Ron J.;Pickles Christopher A.
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- hydrogen;
- laterite;
- limonite;
- reduction;
- thermodynamics;
55.Microstructure and Mechanical Properties of Heat-treated T92 Martensitic Heat Resistant Steel

機譯：熱處理T92馬氏體耐熱鋼的組織和力學性能
- 作者：Kannan P. Rajesh;Muthupandi Veerappan;Arivazhagan B.;Devakumaran K.
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- grain boundary decohesion;
- hardness;
- heat treatment;
- microstructure;
- T92 steel;
- tensile test;
56.FeAl_2O_4 Nanopowders; Structural Analysis and Band Gap Energy

機譯：FeAl_2O_4納米粉;結構分析和帶隙能
- 作者：Enhessari Morteza
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- band gap;
- iron aluminate;
- nanopowders;
- superparamagnetic;
57.The Influence of Dwell Time on Low Cycle Fatigue Behavior of Ni-base Superalloy IC10

機譯：停留時間對鎳基高溫合金IC10低周疲勞行為的影響
- 作者：Wang Anqiang;Liu Lu;Wen Zhixun;Li Zhenwei;Yue Zhufeng
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- crystal plasticity;
- low cycle fatigue;
- microstructure;
58.Effect of Heat Treatment Technique on the Low Temperature Impact Toughness of Steel EQ70 for Offshore Structure

機譯：熱處理工藝對海上結構用EQ70鋼低溫沖擊韌性的影響
- 作者：Tao Sufen;Xia Yunjin;Wang Fuming;Li Jie;Fan Dingdong
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- heat treatment;
- impact toughness;
- microstructure;
- offshore structure steel EQ70;
59.Kinetics of Evaporation of Alloying Elements under Vacuum: Application to Ti alloys in Electron Beam Melting

機譯：真空下合金元素的蒸發動力學：在電子束熔化鈦合金中的應用
- 作者：Choi Wonjin;Jourdan Julien;Matveichev Alexey V.;Jardy Alain;Bellot Jean Pierre
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- activity coefficient;
- electron beam;
- evaporation;
- titanium;
60.Microwave-Assisted Preparation of Activated Carbon from Eupatorium Adenophorum: Effects of Preparation Parameters

機譯：微波輔助從紫莖澤蘭制備活性炭：制備參數的影響。
- 作者：Cheng Song;Zhang Shengzhou;Zhang Libo;Xia Hongying;Peng Jinhui;Wang Shixing
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- activated carbon;
- activation;
- Eupatorium adenophorum;
- microwave heating;
- preparation;
61.High Temperature Mechanical Behavior of MgAl_2O_4-YAG Eutectic Ceramic in Situ Composites by Float Zone Method

機譯：浮區法研究MgAl_2O_4-YAG共晶陶瓷原位復合材料的高溫力學行為
- 作者：Aball Serkan
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- directionally solidified;
- eutectic;
- high temperature;
- mechanical behavior;
- oxide ceramic materials;
62.Change in Microwave-Absorbing Characteristics during the Oxidation Processes of an Ilmenite Concentrate

機譯：鈦鐵礦精礦氧化過程中微波吸收特性的變化
- 作者：Li Wei;Meng Binfang;Wang Xinying;Liu Yuqi;Zhang Libo
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- microwave-absorbing characteristics;
- oxidized ilmenite concentrate;
- XRD;
63.Phase Transition and Thermal Expansion of Ba_3RB_3O_9 (R = Sm-Yb, and Y)

機譯：Ba_3RB_3O_9的相變和熱膨脹（R = Sm-Yb和Y）
- 作者：Simura Rayko;Kawai Shohei;Sugiyama Kazumasa
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- borates;
- high temperature;
- phase transition;
- thermal expansion;
- X-ray diffraction;
64.The Analysis of Parametric Sensitivity Based on Designing and Optimization of a New Microwave Heating System

機譯：基于新型微波加熱系統設計與優化的參數靈敏度分析
- 作者：Chen Hua;Zhang Jin;Fan Zebin;Peng Jinhui;Ju Shaohua
- 期刊名稱：《High temperature materials and processes》 | 2017年第8期
- microwave heating;
- optimizing analysis;
- parametric sensitivity;
- performance matching;
65.Direct Acid Leaching of Vanadium from Stone Coal

機譯：石煤中釩的直接酸浸
- 作者：Zhang Bo;Gao Zhaoguo;Liu Hongzhao;Wang Wei;Cao Yaohua
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- counter-current leaching;
- direct acid leaching;
- stone coal;
- vanadium;
66.Calculation of the Spontaneous Polarization and the Dielectric Constant for the Ferroelectric N(CH_3)_4HSO_4 Using the Mean Field Model

機譯：利用平均場模型計算鐵電N（CH_3）_4HSO_4的自發極化和介電常數
- 作者：Yurtseven Hamit ?ner;?elik Mehmet Gencay;Kara?ali Huseyin
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- dielectric constant;
- ferroelectricity;
- mean field model;
- N(CH_3)_4HSO_4;
- spontaneous polarization;
67.Effect of Cr_2O_3 Pickup on Dissolution of Lime in Converter Slag

機譯：Cr_2O_3的吸收對轉爐渣中石灰溶解的影響
- 作者：Yan Wei;Chen Weiqing;Zhao Xiaobo;Yang Yindong;Mclean Alexander G.M.
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- converter slag;
- Cr_2O_3;
- Lime dissolution;
- low-nickel laterite ore;
68.Structural Properties of Molten CaO-SiO_2-P_2O_5-FeO System

機譯：CaO-SiO_2-P_2O_5-FeO熔融體系的結構性能
- 作者：Diao Jiang;Ke Zhaoqun;Jiang Lu;Zhang Zhen;Zhang Tao;Xie Bing
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- CaO-SiO_2-P_2O_5-FeO;
- molecular dynamics simulation;
- molten slag;
- polymerization degree;
- structure;
69.Effects of Temperature and Strain Rate on Tensile Deformation Behavior of 9Cr-0.5Mo-1.8W-VNb Ferritic Heat-Resistant Steel

機譯：溫度和應變速率對9Cr-0.5Mo-1.8W-VNb鐵素體耐熱鋼拉伸變形行為的影響
- 作者：Guo Xiaofeng;Weng Xiaoxiang;Jiang Yong;Gong Jianming
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- dynamic strain aging;
- P92 steel;
- tensile tests;
70.Zn_1 _(-x)Cd_xO Microtubes: Synthesis and Optical Properties Using Direct Microwave Irradiation

機譯：Zn_1 _（-x）Cd_xO微管：使用直接微波輻射的合成和光學性質
- 作者：Al-Naser Qusay Assim Hanna;Zhou Jian;Liu Guizhen;Wang Lin
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- CdO;
- doping;
- microtubes;
- optical properties;
- ZnO;
71.Microstructure and Diffusion Behaviors of the Diffusion Bonded Mg/Al Joint

機譯：擴散結合的Mg / Al接頭的組織和擴散行為
- 作者：Long Luping;Liu Wensheng;Ma Yunzhu;Wu Lei
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- brittle failure behavior;
- diffusion behaviors;
- diffusion bonding;
- Fick's second law;
- intermetallic compounds;
72.Phosphorus Segregation in Meta-Rapidly Solidified Carbon Steels

機譯：亞快速凝固碳鋼中的磷偏析
- 作者：Li Na;Qiao Jun;Zhang Junwei;Sha Minghong;Li Shengli
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- meta-rapid solidification;
- molten pool;
- segregation;
- twin-roll strip casting;
- vortex flow;
73.Oxidation Kinetics and Spallation Model of Oxide Scale during Cooling Process of Low Carbon Microalloyed Steel

機譯：低碳微合金鋼冷卻過程中氧化皮的氧化動力學和層裂模型
- 作者：Cao Guangming;Li Zhifeng;Tang Junjian;Sun Xianzhen;Liu Zhenyu
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- cooling rate;
- low carbon microalloyed steel;
- mathematical model;
- oxidation kinetics;
- spallation behavior;
74.Effects of Cu Distribution on Solidification Microstructure in Transition Layer of Cu/Al Composite Ingot Prepared by Casting Aluminum Method

機譯：Cu分布對鑄鋁法制備Cu / Al復合鑄錠過渡層凝固組織的影響
- 作者：Chen Shuying;Chang Guowei;Yue Xudong;Li Qingchun
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- composite;
- copper cladding aluminum;
- solid-liquid recombination;
- transition layer;
75.Plasma Methods of Obtainment of Multifunctional Composite Materials, Dispersion-Hardened by Nanoparticles

機譯：納米粒子彌散強化的多功能復合材料的等離子體獲得方法
- 作者：Sizonenko Olga N.;Grigoryev Evgeny G.;Pristash N. S.;Zaichenko A. D.;Torpakov A. S.;Ye V. Lypian;Tregub V. A.;Zholnin A. G.;Yudin Artem V.;Kovalenko A. A.
- 期刊名稱：《High temperature materials and processes》 | 2017年第9期
- dispersion;
- high voltage electric discharge;
- metal powder;
- multifunctional composite materials;
- spark plasma sintering;
76.Processing and Properties of Fire Resistant EPDM Rubber-Based Ceramifiable Composites

機譯：耐火三元乙丙橡膠可陶瓷復合材料的加工與性能
- 作者：Rafat Anyszka;Dariusz M. Bielinski;Zbigniew Pedzich;Magdalena Zarzecka-Napierala;Mateusz Imiela;Przemyslaw Rybinski
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- EPDM rubber;
- ceramization;
- ceramification;
- thermal properties;
- micromorphology;
- composites;
77.Synthesis and Characterization of Poly (styrene-co-butyl acrylate)/Silica Aerogel Nanocomposites by in situ AGET ATRP: Investigating Thermal Properties

機譯：聚（苯乙烯-丙烯酸丁酯）/二氧化硅氣凝膠納米復合材料的原位合成AGET ATRP的合成和表征：研究熱性能
- 作者：Khezrollah Khezri;Yousef Fazli
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
78.Evolution of Voids in Mg/Al Diffusion Bonding Process

機譯：Mg / Al擴散鍵合過程中空洞的演變
- 作者：Luping Long;Wensheng Liu;Yunzhu Ma;Lei Wu;Siwei Tang
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- diffusion bonding;
- void behaviors;
- plastic deformation;
- stresses;
- diffusion;
79.Phenomenological Models to Predict the Flow Stress up to the Peak of as-Extruded 7050 Aluminum Alloy

機譯：預測到達7050鋁合金擠壓峰值時流動應力的現象學模型
- 作者：Yu-Feng Xia;Jia Zhao;Lai Jiang;Shuai Long;Tian-yu Wang
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- hot flow behaviors;
- 7050 aluminum alloy;
- work hardening rate;
- phenomenological models;
80.Energy Dissipation Rate in an Agitated Crucible Containing Molten Metal

機譯：含熔融金屬的攪拌坩堝中的能量耗散率
- 作者：Tao Li;Shin-ichi Shimasaki;Shunsuke Narita;Shoji Taniguchi
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- energy dissipation rate;
- turbulence;
- torque;
- particle coagulation;
- simulation;
81.Solubility of Nitrogen Gas into Molten Copper at Temperature Range of 1,993 K to 2,443 K

機譯：在1,993 K至2,443 K的溫度范圍內氮氣溶解于熔融銅中的溶解度
- 作者：Abdul Muizz Mohd Noor;Nik Hisyamudin Muhd Nor;Seiji Yokoyama
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- solubility;
- nitrogen;
- copper;
- Sieverts' law;
82.Effects of Rolling and Cooling Conditions on Microstructure of Umbrella-Bone Steel

機譯：軋制和冷卻條件對傘骨鋼組織的影響
- 作者：Yan-Xin Wu;Jian-Xun Fu;Hua Zhang;Jie Xu;Qi-Jie Zhai
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- umbrella-bone steel;
- dynamic continuous cooling transformation;
- fast cooling;
- deformation temperature;
83.Preparation of Direct Reduction Sponge Iron (DRI) Using Pyrite Cinder Containing Nonferrous Metals

機譯：含有色金屬的硫鐵礦渣制備直接還原海綿鐵（DRI）
- 作者：Tiejun Chun;Hongming Long;Zhanxia Di;Qingmin Meng;Ping Wang
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- Pyrite cinder;
- nonferrous metals;
- chloride vitalization;
- direct reduction;
84.Self-healing and Oxidation Resistance of B-Si Doped Carbon Materials Derived from Modification Coal Tar Pitch

機譯：改性煤焦油瀝青衍生的B-Si摻雜碳材料的自愈性和抗氧化性
- 作者：X.H. Zuo;Z.J. Dong;G.M. Yuan;Z.W. Cui;X.K. Li
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- B-Si doped;
- carbon materials;
- oxidation resistance;
- self-healing;
85.Effect of High Temperature Hot Corrosion on the Compression Creep Behavior of 12Cr1MoV Alloys

機譯：高溫熱腐蝕對12Cr1MoV合金壓縮蠕變行為的影響
- 作者：Jianjun He;Weizhou Xiong
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
- hot corrosion;
- compression creep behavior;
- layer fracture;
- 12CrlMoV alloys;
86.Dynamic Recrystallization Behavior of Vanadium Microalloyed Cryogenic Fine Grain Structural Steel Pipe at High Strain Rate

機譯：釩微合金化低溫細晶粒結構鋼管在高應變速率下的動態再結晶行為
- 作者：S. S. Zhou;X. Q. Liu;Z. L Liu;Z. G. Hou;Q. C. Tian
- 期刊名稱：《High temperature materials and processes》 | 2017年第10期
87.Marker Method in Studying the Defect Structure in Products of the Oxidation of Highly Disordered Substrates

機譯：研究高度無序底物氧化產物中缺陷結構的標記方法
- 作者：Z. Grzesik;A. Poczekajlo;G. Smola;S. Mrowec
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- marker technique;
- nonstoichiometry;
- interpretation;
88.The Effect of Aging Heat Treatment on the Microstructure and Mechanical Properties of 10Cr20Ni25Mo1.5NbN Austenitic Steel

機譯：時效熱處理對10Cr20Ni25Mo1.5NbN奧氏體鋼組織和力學性能的影響
- 作者：Zhiyuan Liang;Wanhua Sha;Qinxin Zhao;Chongbin Wang;Jianyong Wang;Weiwei Jiang
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- 10Cr20Ni25Mo1.5NbN austenitic;
- aging treatment;
- microstructure;
- mechanical property;
89.Plasma-Augmented Fluidized Bed Gasification of Sub-bituminous Coal in CO_2-O_2 Atmospheres

機譯：CO_2-O_2氣氛中亞煙煤的等離子增強流化床氣化
- 作者：C. Lelievre;C. A. Pickles;S. Hultgren
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- gasification;
- fluidized bed;
- plasma;
- syngas;
- sub-bituminous coal;
- carbon dioxide;
90.Weldability Characteristics of Sintered Hot-Forged AISI 4135 Steel Produced through P/M Route by Using Pulsed Current Gas Tungsten Arc Welding

機譯：脈沖電流鎢極氬弧焊通過P / M工藝生產的燒結熱鍛AISI 4135鋼的焊接性能
- 作者：Joby Joseph;S. Muthukumaran;K.S. Pandey
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- powder metallurgy steel;
- sintering;
- hot forging;
- welding;
- tensile;
- hardness;
91.Mechanism Research on Melting Loss of Coppery Tuyere Small Sleeve in Blast Furnace

機譯：高爐銅風口小套筒熔化損失的機理研究。
- 作者：Yi-Fan Chai;Jian-Liang Zhang;Xiao-Jun Ning;Guang-Yun Wei;Yu-Ting Chen
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- tuyere small sleeve;
- melting loss;
- limescale;
- metallurgical bonding;
92.Dynamic Transmission Performances of Alumina and Mullite Refractory Ceramics in Microwave High-Temperature Heating

機譯：微波高溫加熱中氧化鋁和莫來石質耐火陶瓷的動態傳輸性能
- 作者：Xiaobiao Shang;Junruo Chen;Jinhui Peng
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- alumina;
- mullite;
- power transmission coefficient;
- microwave heating;
93.Research on the Semi-Solid Compressive Deformation Behavior of Ti-7Cu Alloy

機譯：Ti-7Cu合金的半固態壓縮變形行為研究
- 作者：Yongnan Chen;Chuang Luo;Jiao Wang;Yongqing Zhao;Hong Chen
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- Ti-7Cu alloy;
- semi-solid;
- compressive deformation;
- constitutive relationship;
94.Study on Control of Inclusion Compositions in Tire Cord Steel by Low Basicity Top Slag

機譯：低堿度頂渣控制輪胎簾線鋼中夾雜物成分的研究
- 作者：Cai-ping Xin;Feng Yue;Chen-xu Jiang;Qi-fan Wu
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- tire cord steel;
- top slag;
- inclusions plastic;
95.Structure and Properties of the Aluminide Coatings on the Inconel 625 Superalloy

機譯：Inconel 625高溫合金上鋁化物涂層的結構和性能
- 作者：Stanislaw Adamiak;Wojciech Bochnowski;Andrzej Dziedzic;Ryszard Filip;Eugeniusz Szeregij
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- CVD process;
- aluminide coating;
- Inconel 625;
- fracture material;
- micro- and nanohardness;
96.An Improved Arrhenius Constitutive Model and Three-Dimensional Processing Map of a Solution-Treated Ni-Based Superalloy

機譯：固溶鎳基高溫合金的改進Arrhenius本構模型和三維加工圖
- 作者：Hong-Bin Li;Yun-Li Feng
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- alloy;
- hot deformation;
- constitutive model;
- processing map;
- microstructure;
97.Numerical Prediction of the Thermodynamic Properties of Ternary Al-Ni-Pd Alloys

機譯：三元Al-Ni-Pd合金熱力學性質的數值預測
- 作者：Maryana Zagula-Yavorska;Jolanta Romanowska;Slawomir Kotowski;Jan Sieniawski
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- thermodynamics;
- modeling;
- Al-Ni-Pd alloy;
98.Reaction between Steel-Making Slag and Carbonaceous Materials While Mixing with High Density Polyethylene

機譯：煉鋼渣與碳質材料在與高密度聚乙烯混合時的反應
- 作者：Lan Hong;Veena Sahajwalla
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
99.Research on Fracture Toughness of Flattened Brazilian Disc Specimen after High Temperature

機譯：高溫后扁平巴西圓盤試樣斷裂韌性的研究
- 作者：Shi Liu;Jinyu Xu;Peng Wang;Xinyu Fang
- 期刊名稱：《High temperature materials and processes》 | 2016年第1期
- granite;
- marble;
- high temperature;
- flattened Brazilian disc;
- fracture toughness;
100.Synthesis and Characterization of Strontium Carbonate Nanostructures via Simple Hydrothermal Method

機譯：簡單水熱法合成碳酸鍶納米結構及其表征
- 作者：Zahra Asgari-Fard;Mohammad Sabet;Masoud Salavati-Niasari
- 期刊名稱：《High temperature materials and processes》 | 2016年第2期
- nanostructures;
- hydrothermal;
- SrCO_3;
- electron microscopy;
- synthesis;

客服郵箱：[email protected]

京公網安備：11010802029741號 ICP備案號：京ICP備15016152號-6 六維聯合信息科技 (北京) 有限公司?版權所有出版物經營許可證

客服微信
服務號

看新澳门最快开奖结果,新澳门最近15期开什么,马会传真-新澳门云,新澳门三肖三码最准网,新澳门资料新澳门资料